EzMotion 3 in 1

From eedomus - Documentation

Jump to: navigation, search


ExpressControls website : http://www.expresscontrols.com


TYPE DEVICE EEDOMUS
PARAMETERS
COMMENT DOCUMENTATION

Movement detector / Z-Wave / ExpressControls

EzMotion 3 in 1

Include/Exclude:
Default Z-Wave group for the eedomus controller: 1
Batteries: 3x AAA (1,5V)



The EZMotion sensor detects movement, temperature and brightness.

By default, the inactivity time is 20 minutes.

When starting or clicking the blue button, the LED is active for 10 minutes with each motion detection. This allows you to check for detected or undetected movements.

Please change the batteries on this device (from 70' % d battery wear).

Installation: How to attach it to the wall?

- drill the rear hull into holes provided for this purpose, with a drill, cross a screw that will be snapked into the wall in line with the material (concrete, plywood,...). Be careful to use the holes provided for this purpose, so that the heads of the screws do not prevent the closing of the case;!


EZMotionOwnerManual (New Version).pdf
EZMotionOwnerManual.pdf
EZMotionSDK.pdf